EMC Engineer – EMC troubleshooting, design reviews, protection circuits calculation, EMC tests execution, CE, FCC, RCM qualification, in field EMC measurements.

Engineer with 10 years of experience in the field of EMC and RED, and design of electronic modules. An expert in the field of EMC and radio standards, EN / IEC / FCC / EAC, DNV-GL, ETSI, etc. He works with the preparation of engineering analyses, reports, research plans, and strategies of certification. He tests devices in

Engineer specializing in aspects related to the safety and compliance of electrical and electronic machines and devices on the EU, USA / Canada, Australia / New Zealand market. I have gained many years of experience in the automotive industry (product testing and validation), oil & gas (including issues related to the ATEX directive) and the production of electrical / electronic machinery and equipment. For over 8 years I have been working with the European Union directives, mainly in the field of machine and electrical equipment safety (MD, LVD, EMC) supporting engineers, production and product managers at every stage of product life: from the idea, development, prototype and implementation concept, ending with maintenance in production including engineering changes.

 

What will be said:
– definition of the manufacturer and economic operator in regard to the directives

– product definition and its critical parameters from the point of view of directives,

– examples of changing the classification from the point of view of the directive due to the definition of the interface

LVD – Low Voltage Directive – 2014/35 / EU
MD – Machinery Directive 2006/42 / EC

Application engineer Würth Elektronik Polska. For many years associated with sales support and technical support of clients in the field of products offered by Würth Elektronik. Speaker of many EMC trainings and seminars offered to clients in Poland.

He is product manager for the entire EMC product range of the Schurter group. Prior to that, he worked for over 10 years as a project manager in the development engineer of filters. He holds a degree in Electrical Engineering and a Master in Business Administration.

Head of the Laboratory of Electromagnetic Compatibility Radiotechnika Marketing Sp. z o.o.

A graduate of the Wrocław University of Technology, specialization Electronic Equipment, faculty of Electronics.

He has been dealing with electromagnetic compatibility since the beginning of his professional activity, in particular by focusing on the aspects of EMC research for the industry:

• heavy industry,
• mining,
• metallurgy,
• automotive,
• military.

In addition, he did calibrations of equipment dedicated to EMC tests in an accredited calibration laboratory, and participated in product certification processes for the needs of a notified unit.

In order to optimize laboratory activities, he created dedicated automation, control and measurement software.

Electronic engineer with 20 years practical experience in the industry. He managed electronics teams and projects in R & D.
For many years, he developed and implemented transducers of physical quantities in industrial environments. For 10 years, he designs, develops and studies electronics for large-scale production of household appliances.

The presentation will present an introduction to the new stanard in mobile telecommunication – the 5 generation (5G) in terms of new applications and the capabilities of this system. An outline of 3GPP standards for 5G systems will be presented which define RF and EMC requirements for base stations and terminal devices as well as their relation to ETSI and RED standards. The most important RF requirements and measurement challenges related to the introduction of new frequency bands (mainly in the field of millimeter waves) and new technologies (massive MIMO, beamforming, etc.) for 5G systems will be discussed.

Experience:

Marcin Rybakowski is a graduate of the Faculty of Electronics at the Wrocław University of Technology and holds a master’s degree in electronics and telecommunications, specializing in mobile telecommunications. The author works in the 5G RAN Architecture & Specification department in the Nokia branch in Wrocław, where he deals with the specification and architecture of radio modules for 5G systems and standardization of RF requirements for 5G devices under 3GPP. The author has over 10 years of experience in the development of base stations for mobile telecommunications systems and on the research and standardization of future generations of these systems. In the area of interest of the author there are issues of RF technology and millimeter waves, propagation of radio waves and radio channel modeling, new techniques of the physical layer of wireless systems as well as modeling and evaluation of radiocommunication systems. In the author’s output there are 10+ articles at Polish and foreign conferences and he co-authored about 10 patents in the field of radiocommunication technologies

 

5G RF System Engineering, 3GPP RAN4 standarization

5G research – millimeter wave and centimeter wave deployment research, mmWave propagation simulation and modeling

WCDMA HSPA HetNet research – Interference Management, HetNet Mobility, WCDMA HSPA Smartphone signaling, WCDMA HSPA M2M communication

What will be said ?

The examples of common problems that engineers face while designing medical devices where there are some practical challenges e.g.

• “Home Healthcare”, “Professional Healthcare Facility”, and “Special” environments

• EMC Risk Management

• Protection class

• The leakage current of the device and the patient

• Resistance of protective earth

• Means of Operator Protection and Means of Patient Protection

• Application parts of the medical device B/BF/CF

Experience

A graduate of Warsaw University of Technology, Specialization Electronics and Computer Engineering, Faculty of Electronics and Information Technology. He has broad technical knowledge and experience with bringing medical products to the market in accordance to EN60601-1-2. Electromagnetic compatibility has always interested him. In his work he works with hardware and software topics – treating them as an inseparable that guarantee to fulfil EMC requirements.

Electrical engineering engineer with 4 years of experience gained in international companies from the power electronics industry.

Key competences include the ability to streamline processes and products, read documentation and electrical diagrams, and prototype electrical and electronic devices. Has extensive knowledge of electromagnetic compatibility. He knows the basic range of standards and standards related to the certification of industrial equipment. It supports laboratory and test equipment such as: multimeters, oscilloscopes, function generators and analyzers. It possesses SEP electrical qualifications for operation „E” and supervision „D” up to 1 kV.